HP Cisco MDS 9124e Fabric Switch for BladeSystem c-Class - Manual (Page 27)

Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 27
10. Enter a new admin password.
switch(boot)(config)# admin-password
switch(boot)(config)# exit
switch(boot)#
11. View the system image in bootflash.
switch(boot)# dir bootflash:
For example: m9100-s2ek9-mz.3.1.3a.bin
12. Load the system image.
switch(boot)# load bootflash:system_image
For example: load bootflash:m9100-s2ek9-mz.3.1.3a.bin
13. Verify that you now see the Cisco MDS 9124e Switch login prompt, switch login#.
14. If necessary, reset the SNMP admin password after logging in to the switch, as in the following
example:
switch# config t
switch(config)# snmp-server user admin auth md5
switch(config)# exit
switch(config)# copy run start
Refer to the Cisco MDS 9000 Family Fabric Manager Configuration Guide and the Cisco MDS
9000 Family CLI Configuration Guide for detailed instructions.