HP NonStop G-Series - Manual (Page 73)

OSS File Synchronization
HP AutoSYNC User’s Guide—522580-015
5-7
Synchronization Options
In BIND, issue the following commands:
Then, as SUPER.SUPER, issue the following command:
Or if synchronizing over TCP/IP:
Then, as SUPER.SUPER, issue the following command:
Synchronization Options
In addition to the OSS-specific options described above, the following options are
supported:
•
BATCHID
•
EXCLUDE
•
FROMOWNER
•
HOSTNAME
•
INTERVAL
•
KEEPBACKUPINFILE
•
KEEPSECURITY
•
LISTALL
•
OPENUPDATE
ADD * FROM ASYSYNC
ALTER CALLABLE^LOG^DOWN, CALLABLE ON
BUILD ASYSYNC!
FUP LICENSE ASYSYNC
ADD * FROM ASYSYNCP
ALTER CALLABLE^LOG^DOWN, CALLABLE ON
BUILD ASYSYNCP!
FUP LICENSE ASYSYNCP
Note. Once you have altered ASYSYNC or ASYSYNCP with the above Binder commands,
ASYSYNC or ASYSYNCP must be licensed or all synchronizations that use that program will
fail.
WARNING. By configuring a callable ASYSYNC or ASYSYNCP, the systems administrator
allows a syncuser to perform operations on the remote system that would have previously
required the knowledge of the local password. This arrangement is particularly critical to
remember if the syncuser is SUPER.SUPER.