HP NonStop G-Series - Manual (Page 125)

Command Interpreter
HP AutoSYNC User’s Guide—522580-015
8-37
ALTER SYNCFILESET
* | fset-id | fset-id - fset-id
identifies a synchronization file-set ID or a range of file-set IDs. Up to 32 ranges
can be entered.
If fset-id - fset-id is specified, the second fset-id must be greater than the first.
* designates all configured syncfilesets for the syncuser.
common-options
AUTOSUSPEND
specifies that the configured fileset will execute once and then will
automatically be suspended. This is similar to a one-time synchronization,
except that the synchronization options are kept in the configured syncfilesets
and can be activated each time the user wants the synchronization to be
performed. Many AUTOSUSPEND synchronizations can be activated with a
single ACTIVATE BATCHID command.
INFO SYNCFilset command displays the last synchronization time.
This option is designed to facilitate the use of AutoSYNC with a batch
scheduler such as Netbatch.
BATCHID batchid | NO BATCHID
a batch identifier for the file set.
The batchid is an unsigned integer and can be specified as a number between
0 and 65535 or as two ASCII characters in quotes. The default batchid is 0.
All file sets that have the same batchid for a given user and destination system
are synchronized in sequence by a single ASYSYNC process.
To have more than one ASYSYNC process for the same destination system,
use different BATCHIDs.
EXCLUDE exclude-file | NO EXCLUDE
instructs AutoSYNC to exclude (or remove exclusion of) the files listed in
exclude-file from synchronization.
OSS-only-options:
{ ALLHARDLINKS | NO ALLHARDLINKS }
{ ALLSYMLINKS | NO ALLSYMLINKS }
{ OWNERG[ROUP] {{ group-id | group-user } | NO OWNERG[ROUP]}
{ SECURE “rwxrwxrwx” | NO SECURE }