HP NonStop G-Series User Manual
Page 123
Command Interpreter
HP AutoSYNC User’s Guide—522580-015
8-35
ALTER SYNCFILESET
Modifies the options of the syncfilesets in the specified fset-id range.
ALTER SYNCF[ILESET] fset-range [, fset-range ], ...
{, options... };
fset-range is { * | fset-id | fset-id - fset-id }
common-options:
{ AUTOSUSPEND | NO AUTOSUSPEND
}
{ BATCHID batchid | NO BATCHID
}
{ EXCLUDE exclude-file | NO EXCLUDE
}
{ FROM file-set
}
{ FROMO[NER] user-id | NO FROMO[NER]
}
{ [IP]HOST[NAME] { tcpip-address | host-name }
| NO [IP]HOST[NAME]
}
{ INTERVAL interval [ MINUTES | HOURS | DAYS ] | NO INTERVAL}
{ KEEPS[ECURITY] | NO KEEPS[ECURITY]
}
{ KEEPB[ACKUPINFILE] | NO KEEPB[ACKUPINFILE]
}
{ LISTA[LL] | NO LISTA[LL]
}
{ OPENU[PDATE] interval [SECONDS|MINUTES|HOURS]
| NO OPENU[PDATE]
}
{ OWNER { user-id | user-name } | NO OWNER
}
{ PRI[ORITY] priority | NO PRI[ORITY]
}
{ PURGE | NO PURGE
}
{ RATE percentage | NO RATE
}
{ START hh:mm:ss | NO START
}
{ STOP hh:mm:ss | NO STOP
}
{ SUSPEND
}
{ TRIGGER { tacl-command | oss-shell-command }| NO TRIGGER
}
{ TRIGGERONFILESET { tacl-command | oss-shell-command }
| NO TRIGGERONFILESET
}