HP NonStop G-Series - Manual (Page 119)

Command Interpreter
HP AutoSYNC User’s Guide—522580-015
8-31
ALTER MAPDB
monitor process is restarted. These attributes can also be changed using ALTER
MONITOR .
subvol
the name of the MapDB subvolume.
If this command is used to change the name of the monitor, the current monitor
process must first be stopped.
BACKUP cpu-number
the CPU number (in the range of 0 to 15) of the backup monitor process.
HOMETERM [ file-name | NONE ]
a home terminal for the monitor process.
If this option is not specified, the default monitor process hometerm is set to the
system console. The monitor process writes the messages that would normally go
to its hometerm to the EMS collector $0 or to the collector specified through the
EMSCOLLECTOR global parameter.
If NONE is specified or if file-name is omitted, the hometerm is reset to the default
value described above.
AutoSYNC prints a warning when it starts the monitor process and its hometerm is
defaulted.
MONITOR process-name
the name of the monitor process to be associated with the MapDB. The name must
have 4 characters.
The default is $ZASY.
PRIMARY cpu-number
the CPU number (in the range of 0 to 15) of the primary monitor process.
PRIORITY process-priority
ALTER MAPDB subvol { , option... }
option is:
{ BACKUP cpu-number }
{ HOMETERM [ file-name | NONE ] }
{ MONITOR monitor-name }
{ PRIMARY cpu-number }
{ PRIORITY process-priority }