HP Integrity NonStop J-Series - Manual (Page 263)

Sample Project-Tracking System
Event-Revised Application
S5044-070
Event Revision Screen
Page 1/1
Enter a project no. and an event no., then press F6. After you make
changes, press F14.
* Event ID
Project No. __________ Event No. ______
Original Dates
Starting Ending
Event Description dy mo yr dy mo yr
________________________ __ __ __ __ __ __
Revised Dates
Starting Ending Your ID
dy mo yr dy mo yr Reason for date change No.
__ __ __ __ __ __ __________________________________ _______
Ready for input F3 for Help, Shift F16 to Exit
Figure 12-23. Screen Displayed by Event-Revised
Application
Figure 12-24 shows the ENABLE commands used to generate the
"event-revised" application. The numbers that appear to the
right of this figure refer to commands of particular interest
that:
1. Identify "events" as the value of the RECORD attribute
(Since this value is neither overridden or reset, ENABLE uses
this value for the record description of all the boxes used
by the application.)
2. Indicate that the application can only read records for the
"my-events" and "events-3" boxes (These boxes display fields
from an event record that should not be changed.)
3. Indicate that the application is automatically to read
information for the "events-3" box whenever the contents of
the "my-events" box changes
12-35