HP ProLiant SL2x170z G6 Server - Manual (Page 47)

•
DHCP—Enables you to set the BMC IP to DHCP by selecting the Enabled box, or to Static by
clearing the Enabled box. For the changes to take effect, click Apply.
When setting the BMC IP to Static, to set a valid static IP, you must enter a static IP into the IP
Address field before you click Apply.
•
DNS Server IP Address—Displays IP address of the DNS server.
•
DNS Server Alternate IP Address—Displays secondary DNS IP address.
•
DNS Host Name—Displays the host name set by user, defaulted to lo100.
This name is the DNS name associated with the IP address. If DHCP and DNS are configured
correctly, this name can be used to connect to the LO100 subsystem instead of the IP address.
•
DNS Current Domain Name—Displays the current name of the domain where the LO100
subsystem resides. DHCP assigns this name. This name would be what is currently registered,
whether it was returned through option 6, or it was configured locally as a default.
•
DNS Configured Domain Name—Displays the domain name set by user as default domain
name.
•
Register this Connection's Addresses in DNS—Enables you to register these server addresses
to the DNS Server on the network. DHCP option 81 is used to register the host name with the
appropriate DNS suffix to the DNS server through the DHCP server.
•
Use this connection's DNS suffix in the DNS Registration¾Enables you to register the DNS
suffix with the DNS server. Enables you to set and use a default domain name if the DHCP
server does not offer one through DHCP Option 6.
Disabling this option can result in the connection using its primary DNS suffix, which is usually
the DNS name of the active directory domain to which it is joined.
•
Telnet Inactivity Timeout—Enables you to set the total time limit allowed of inactivity (in seconds)
during a telnet connection before the connection is terminated.
To disable Telnet Inactivity timeout, set the field to 0.
If you are using Windows Vista or Windows Server 2008, from the Windows Features On/Off
option of the Programs and Features menu in the Control Panel, you must activate Telnet Server
and Telnet CIient.
•
Enabled—VLAN settings are enabled.
•
VLAN ID—The ID with which you wish to communicate.
•
Priority—Set value: 1-8. HP recommends that you leave the priority at the default (1).
LO100 enables you to register this connection address in DNS, and use this connection DNS
registration. You can use this DNS registration feature only if you have enabled DHCP.
Configuring network settings using the BIOS Setup Utility
To enable a static IP address:
1. Press the F10 key during POST to enter the BIOS Setup Utility.
2. Press the right arrow (
→) key to navigate to the Advanced menu.
3. Press the down arrow (
↓) key to scroll to IPMI. Press the Enter key.
4. To set your network BIOS settings, choose one of these options:
•
On ML110 G6 and DL120 G6 servers:
Press the down arrow (
↓) key to scroll to IPMI, and press the Enter key.
a.
b.
Press the down arrow (
↓) key to scroll to LAN Settings, and press the Enter key.
c. Set IP Address Assignment to Static.
•
On ML150 G6 servers:
Network settings 47