Setting up the windows 7 operating system, Installing or upgrading device drivers – HP Z620 Workstation User Manual
Page 40

4
Setting up, backing up, restoring, and
recovering Windows 7
This chapter provides setup and update information for the Windows 7 operating system. It includes
these topics:
●
Setting up the Windows 7 operating system
●
Backing up, restoring, and recovering Windows 7
CAUTION:
Do not add optional hardware or third-party devices to the HP workstation until the
operating system is successfully installed. Adding hardware might cause errors and prevent the
operating system from installing correctly.
NOTE:
After you set up the operating system, be sure that the latest BIOS, drivers, and software
updates are installed on the workstation. See
Updating the workstation on page 47
.
Setting up the Windows 7 operating system
CAUTION:
After installation has started, do
not turn off the workstation until the process is
complete. Turning off the workstation during installation can damage the installation and operation of
the software.
For complete installation and configuration instructions, go to
install the operating system.
Installing or upgrading device drivers
You must install the appropriate device drivers before you install hardware devices. Follow the
installation instructions that came with each device. For optimum performance, your operating system
must have the most recent updates, patches, and service packs.
qualified drivers. For additional driver and software update information, see
.
32 Chapter 4 Setting up, backing up, restoring, and recovering Windows 7