Asante Technologies Asante Hub 1016-IQ - Manual (Page 68)

Menus
Page 5-22
Security
This menu is not a management option; it is a title for the sub-menus
listed below it. This menu cannot be selected.
Port Security
This menu allows you to control access to the device’s ports by specify-
ing the physical addresses that are allowed to connect to the ports.
If an unauthorized physical address attempts to connect to a restricted
port, an action (such as partition the port, send a trap, etc) can occur.
Table 5-15 describes each field in the Port Security menu.
∆
Note: For instructions on using this menu, see “Setting Port
Security” on page 4-23.
Table 5-15 Port Security Menu
Field Description
Group Read-only field; displays the number of the group.
Port Read-only field; displays the number of the port on the
group.
Status Configurable field; determines the status of the entry.
❏
valid — entry is active.
❏
invalid — entry is inactive (deletes the entry).
Allowed Address Configurable field; displays the physical address that is
allowed to connect to the specified port.