Asante Technologies Asante Hub 1016-IQ - Manual (Page 30)

Management
Page 4-12
Partitioning a Port
Port partitioning is an operation that is done automatically by the
AsantéHub 1016-IQ in certain circumstances to stop transmission on a
port, if the port is enabled for automatic partitioning.
To enable or disable automatic partitioning:
1
Select the port to be partitioned by clicking on it once
on the front-panel image.
2
Click Partition.
The Port Partition Table appears, similar to Figure 4-9.
Figure 4-9 Port Partition Table
3
Open the Action drop-down menu and select enable
(to enable automatic partitioning) or disable (to dis-
able automatic partitioning).
4
Click Apply.
The port’s partitioning state is modified.
Click Refresh to view updated information.