Asante Technologies Asante Hub 1016-IQ - Manual (Page 52)

Menus
Page 5-6
Ports
This menu provides read-only and configurable information for each
port on the device.
Table 5-5 describes each field in the Ports menu.
∆
Note: For instructions on using this menu, see “Enabling/
Disabling Ports” on page 4-10 and “Partitioning a Port” on
page 4-12.
Table 5-5 Ports Menu
Field Description
Group Read-only field; displays the number of the group to
which the associated port belongs.
Port Read-only field; displays the number of the port for which
information is displayed.
Port Type Read-only field; displays the type of connector on the port
(for example, RJ-45).
Link Status Read-only field; displays if a device is connected to the
selected port.
❏
linkon — a device is properly connected to the
selected port and is powered on.
❏
linkoff — a device is not connected to the port.
AutoPart Status Configurable field; displays the automatic partitioning sta-
tus of the selected port.
❏
autopartitioned — the port is configured for
automatic partitioning.
❏
noautopartitioned — the port is not configured
for automatic partitioning.