Asante Technologies Asante Hub 1016-IQ - Manual (Page 21)

Performing Basic Management Functions
Page 4-3
Setting Community Strings
Community strings define access rights for reading and writing SNMP
data objects for a device.
The community strings (read and write) for an AsantéHub 1016-IQ are
manually set in the AsantéHub 1016-IQ via its console port.
In order to access the AsantéHub 1016-IQ with IntraSpection, the com-
munity strings must be set in IntraSpection to match those set in the
AsantéHub 1016-IQ.
▲ Important: It is recommended that you set the commu-
nity strings for an AsantéHub 1016-IQ in IntraSpection
before you attempt to perform any network management
functions.
This section describes how to set the community strings in IntraSpec-
tion to match those set in the AsantéHub 1016-IQ.
To set the community strings for an AsantéHub 1016-IQ in IntraSpec-
tion:
1
On the AsantéHub 1016-IQ’s Device Page, click the
map icon on the IntraSpection navigation bar (located
at the bottom of the screen), as shown in Figure 4-1.
Figure 4-1 IntraSpection navigation bar
The most recently discovered map appears.
2
Click the Map Manager button.
The Map Manager Page appears, similar to Figure 4-2.
Map Icon