HP Matrix Operating Environment Software - Manual (Page 67)

Prerequisites
•
You must be logged in to Matrix OE. (See “Accessing Capacity Advisor” (page 37) .)
•
You must have created the scenario. (See “Creating a planning scenario” (page 65) .)
1. If you are not on the Planning tab:
•
If the Planning tab is visible, click the Planning tab.
•
If the Planning tab is not visible, select Optimize
→Planning→View Planning Scenarios...
from the top menu bar.
The Planning tab will open, with a list of scenarios.
2. Any scenarios you have authorization to edit will be presented as links. Click the name of the
scenario you want to edit.
The Capacity Advisor - Edit Scenario screen will be displayed.
Controlling the data display
The default values for the data range and the Metric View Selection may not accurately represent
the interval of interest and the preferred metric. These are easily adjusted.
Change the meter style selection
Prerequisites:
•
You must be editing a scenario (see “Editing a scenario” (page 66) ).
• Click the Absolute or Percent radio button.
The meter bars in the scenario resource utilization table display the data as absolute numbers
or as percentages, according to your selection.
Change the data collection period by setting the data range
Set the interval within a data collection period that you want to use as the foundation for a simulation
or to view a specific historic period.
Prerequisites:
•
You must be editing a scenario (see “Editing a scenario” (page 66) )
NOTE: Changes to the data collection period persist across sessions.
1. Click Edit Interval within the Set Data Range box.
The fields are enabled as shown in the following image.
2. Click the first drop-down arrow to the left to see the choices for the duration of the data
collection period that you want to use.
Choose one to view in the display. The choices are as follow:
Working with scenarios 67