AudioCodes MEDIAPACK VERSION 6.2 - Manual (Page 112)

SIP Release Notes 112 Document #: LTRT-26901
CPE SIP Products
1.12.2 SBC Parameters
The table below describes SBC parameters from the previous release that have been
modified in Release 6.2.
Table 1-14: Modified SBC Parameter for Release 6.2
Parameter Description
IP Group Table
[IPGroup] Modification: Option [2] for IPGroup_Type (Mediant 800 MSBG,
Mediant 1000 MSBG, Mediant 3000); Option [2] for
IPGroup_EnableSurvivability.
[IPGroup]
FORMAT IPGroup_Index = IPGroup_Type, IPGroup_Description,
IPGroup_ProxySetId, IPGroup_SIPGroupName,
IPGroup_ContactUser, IPGroup_EnableSurvivability,
IPGroup_ServingIPGroup, IPGroup_SipReRoutingMode,
IPGroup_AlwaysUseRouteTable, IPGroup_RoutingMode,
IPGroup_SRD, IPGroup_MediaRealm, IPGroup_ClassifyByProxySet,
IPGroup_ProfileId, IPGroup_MaxNumOfRegUsers,
IPGroup_InboundManSet, IPGroup_OutboundManSet;
[\IPGroup]
Where:
IPGroup_Type:
[0] SERVER
[1] USER
[2] GATEWAY
IPGroup_EnableSurvivability:
[0] Disable (default)
[1] Enable if Necessary
[2] Always Enable = Survivability mode is always enabled. The
communication with the Serving IP Group (e.g., IP-PBX) is
always considered as failed. The device uses its database for
routing calls between the clients (e.g., IP phones) of the USER-
type IP Group.
Admission Control Table
[SBCAdmissionControl] Modification: Rate and MaxBurst parameters added (Mediant 800
MSBG, Mediant 1000 MSBG).
[SBCAdmissionControl]
FORMAT SBCAdmissionControl_Index =
SBCAdmissionControl_LimitType, SBCAdmissionControl_IPGroupID,
SBCAdmissionControl_SRDID, SBCAdmissionControl_RequestType,
SBCAdmissionControl_RequestDirection,
SBCAdmissionControl_Limit, SBCAdmissionControl_LimitPerUser,
SBCAdmissionControl_Rate, SBCAdmissionControl_MaxBurst;
[\SBCAdmissionControl]
Where:
Rate = rate at which tokens are added to the bucket (i.e., token
rate). One token is added to the bucket every 1000/Rate
milliseconds. In other words, this is the rate of dialog setups per
second, or unlimited if set to 0 (default).
MaxBurst = Maximum tokens that can fill the bucket. At any given
time, the bucket cannot contain more than this amount of tokens. In
other words, this is the maximum burst size for the dialog setup
rate, or unlimited if set to 0 (default).