AudioCodes MEDIAPACK VERSION 6.2 - Manual (Page 31)

Version 6.2 31 December 2010
SIP Release Notes 1. What's New in Release 6.2
9. Flash-Hook with Digit Sequence:
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
Management Protocol
Web INI SNMP EMS CLI
This feature provides enhanced support for flash-hook digit sequences for FXS
interfaces. The existing FlashKeysSequenceStyle parameter includes an additional
option (2) that provides the following flash-hook digit sequences:
• Flash Hook key only (no other digit): Places an active call on hold.
• Flash Hook and then digit 2: Answers the call-waiting call (the first call is put on
hold).
• Flash Hook and then digit 2: Toggles between active call and on-hold call.
• Flash Hook and then digit 3: Enters a three-way conference. Note that the
settings of the existing ConferenceCode parameter are ignored.
• Flash Hook and then digit 4: Transfers a call (instead of going on-hook).
10. On-Board, Three-Way Conferencing:
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
Management Protocol
Web INI SNMP EMS CLI
This feature provides support for on-board, three-way conferencing for FXS interfaces.
The call conference is established by the device without the need of an external
conference server. The device sets up the conference call using its IP media channels
from the IP media module (i.e., MPM module). This feature is configured using the new
option, On Board (2) for the existing 3WayConferenceMode parameter.
The maximum number of simultaneous on-board, three-way conference calls
supported by the device is:
• 2 for Mediant 800
• 5 for Mediant 1000 and Mediant 1000 MSBG
(Note that this feature is already supported by MP-11x.)