AudioCodes MEDIAPACK VERSION 6.2 - Manual (Page 76)

SIP Release Notes 76 Document #: LTRT-26901
CPE SIP Products
1.9 Infrastructure New Features
The device supports the following new infrastructure features:
1. Enhanced Syslog Message Management using Facility Levels:
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
Management Protocol
Web INI SNMP EMS CLI
This feature supports the configuration of the Facility level (0 through 7) for the
device’s Syslog messages, according to RFC 3164. This feature is useful, for example,
to customers who collect the device’s and other equipments’ Syslog messages at one
single server. The device’s Syslog messages can easily be identified and distinguished
from other Syslog messages by its Facility level. Therefore, in addition to filtering
Syslog messages according to IP address, the messages can be filtered according to
Facility level.
The Facility level is configured by the new parameter, SyslogFacility, which provides
the following levels:
• 16 - local use 0 (local0) - default
• 17 - local use 1 (local1)
• 18 - local use 2 (local2)
• 19 - local use 3 (local3)
• 20 - local use 4 (local4)
• 21 - local use 5 (local5)
• 22 - local use 6 (local6)
• 23 - local use 7 (local7)
2. Power over Ethernet (PoE) Port Status:
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
Management Protocol
Web INI SNMP EMS CLI
This feature provides Power over Ethernet (PoE) status indication when an IP Phone
is connected to one of the device’s LAN ports. This status is provided by the CLI
GetPOEPortStatusCmd command, which when run, displays the status.