AudioCodes MEDIAPACK VERSION 6.2 User Manual
Page 128
SIP Release Notes
128
Document #: LTRT-26901
CPE SIP Products
Configurable channel-select mode per trunk group.
Various number manipulation rules for IP-to-Tel and Tel-to-IP, called and calling
numbers.
Option to configure ISDN Transfer Capability per trunk.
Transfer of User-to-User Information Element (UUIE) between SIP and PRI.
ISDN Transfer using TBCT / RLT / ECT.
QSIG messages tunneling over SIP according to ECMA-355(ISO/IEC 22535).
ISDN PRI messages tunneling over SIP messages according to RFC 3372 - SIP-T.
Interworking of Hold/Retrieve supplementary services from QSIG/EuroISDN to SIP
and vice versa.
QSIG and EURO ISDN Deflection (Rerouting), interworking of Call Rerouting Facility
to SIP 302 response in both IP-to-Tel and Tel-to IP directions.
QSIG MWI Notifications and QSIG MWI Interrogation.
QSIG Single Step Transfer from QSIG to SIP, and vice versa.
QSIG Path Replacement from SIP to QSIG.
QSIG BRI Suspend/Resume.
Euro-ISDN MWI
BRI Call Forwarding (supported by the softswitch that does the call forward operation;
the device simply provides the softswitch the information (by DTMF) about the forward
numbers.
Comply with DoD UCR 2008 Change 1 specifications, including Multi-Level
Precedence & Preemption (MLPP) using NI-2. (Not applicable to Mediant 800 MSBG.)
Calling Party Category interworking between PRI and SIP according to
E911 Generic Information IE (according to Telcordia GR-2968-CORE) from SIP to NI-
2. (Not applicable to Mediant 800 MSBG.)