AudioCodes MEDIAPACK VERSION 6.2 - Manual (Page 73)

Version 6.2 73 December 2010
SIP Release Notes 1. What's New in Release 6.2
3. Local-line Loopback on T1 WAN Interface:
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
Management Protocol
Web INI SNMP EMS CLI
The device now supports local-line loopback on the T1 WAN interface. In this
loopback, packets from the Tx line interface connect to the Rx line interface. The
maximum time of this loopback is user-defined. This featured is enabled and
configured using the loopback CLI command.
4. WAN Ethernet Port Settings (Speed and Duplex Mode):
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
Management Protocol
Web INI SNMP EMS CLI
The device now supports the configuration of link speed and duplex mode of the WAN
Ethernet port:
• Port speed: 10BaseT, 100Base-T, 1000Base-T, or autonegotiation
• Duplex mode: half-duplex, full-duplex, or autonegotiation
5. IPSec Crypto CLI:
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
Management Protocol
Web INI SNMP EMS CLI
The device now supports the configuration of IPSec tunneling using "crypto" CLI
commands. The main CLI commands include the following:
• crypto isakmp key: defines a preshared authentication key