Aiwa XH-A1000 - Manual (Page 18)

ENGLISH
17
En
BASIC OPERATIONS
LOADING DISCS
Press CD, then press z CD OPEN/CLOSE to open
the disc compartment. Load disc(s) with the label
side up.
To load one or two discs, place the discs tray 1 and tray 2.
To load three discs, press DISC CHANGE to rotate the trays
after placing two discs. Place the third disc on tray 3.
After placing the discs, press z CD OPEN/CLOSE to close
the disc compartment.
The display shows the information of the disc to be played.
Tray number of the disc to be played
Total number of tracks Total playing time
CD PLAYING
CD PLA
YING T
APE PLA
YBACK
CD
z CD OPEN
/CLOSE
DISC
CHANGE
PLAYING DISCS
Load discs.
To play all discs in the disc compartment (continuous
play), press
d .
Play begins with the disc on tray 1.
The indicator of DISC DIRECT PLAY flashes to indicate the disc
being played.
To play one disc only (single disc play), press one of
DISC DIRECT PLAY 1-3.
The disc with the selected tray number is played once.
Only the indicator of the selected DISC DIRECT PLAY flashes.
To play with the remote control
Press DISC DIRECT PLAY, then press one of the numbered
buttons 1-3 within 3 seconds to select a disc.
To stop play, press s .
To pause play, press a . To resume play, press again.
To search for a particular point during playback, keep f
or g pressed and release the button at the desired point.
To skip to the beginning of a track during playback, turn
MULTI JOG or press
f or g repeatedly.
To remove discs, press z CD OPEN/CLOSE.
You can only remove the two discs that face you. When the
disc(s) to be removed does(do) not face you, press DISC
CHANGE repeatedly.
Number of track
being played Elapsed playing time
Selected
disc tray
number
Elapsed playing time
Number of track
being played
d DIRECTION/
PRESET
MULTI
JOG
DISC
DIRECT PLAY
DISC
DIRECT
PLAY
s
c / d
CD EDIT/
CHECK
0-9,+10
CD
f , g
z CD
OPEN/
CLOSE