Canon imagePROGRAF iPF750 MFP M40 - Manual (Page 849)

Multi-sensor error
Cause Corrective Action
Direct sunlight or strong lighting may be shin-
ing on the printer and causing the sensor to
malfunction. Take steps to ensure the printer is not used when exposed to direct
sunlight or strong lighting.
The performance of a sensor inside the printer
may be impaired. Turn off the printer and wait at least three seconds before restoring
the power.
If the message is displayed again, contact your Canon dealer for as-
sistance.
Error in cutter position.
Cause Corrective Action
The Cutter Unit stops in the middle of cutting. 1. Push the Release Lever back and remove the paper.
2. Pull the Release Lever forward.
Error Message > Other Messages >
iPF750 Multi-sensor error
12
833