Canon imagePROGRAF iPF750 MFP M40 - Manual (Page 841)

Messages regarding printing or adjustment
Cannot adjust paper feed. .............................................................................................................................. 825
Check printed document. ............................................................................................................................... 825
Cannot adjust paper feed.
Cause Corrective Action
The Printhead nozzles are clogged. Execute Adj. Quality again, as follows.
1. Press the OK button to clear the error.
2. Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.")
→P.739
3. Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.")
→P.740
4. Execute Adj. Quality again.
(See "Automatic Banding Adjustment (Adj. Quality).")
→P.630
Highly transparent film is loaded
that cannot be used for automatic
feed amount adjustment. Press the OK button to clear the error, and then adjust the feed amount manually.
(See "Manual Banding Adjustment (Adj. Quality).")
→P.631
Check printed document.
Cause Corrective Action
The Printhead nozzles are becoming clogged. If printing is faint, clean the Printhead.
(See "Cleaning the Printhead.")
→P.740
Error Message > Messages regarding printing or adjustment >
iPF750 Cannot adjust paper feed.
12
825