Canon imagePROGRAF iPF750 MFP M40 User Manual
Page 694
Setting Item
Description, Instructions
Adjust
Printer
Feed
Priori-
ty
Adjust
Length
Adjust-
ment-
Print
A:High
Print a test pattern for particular types of paper to
compensate for paper stretching or shrinkage, after
which you enter the amount of adjustment. (See "Ad-
justing Line Length (Adjust Length).")
B:Standard/Draft
Chang
e Set-
tings
A:High
Displayed when you have selected Feed Priority >
Adj. Priority > Print Length.
Adjustment relative to the amount of stretching or
shrinkage of the current paper.
Enter either the adjustment results from Adjustment-
Print or the discrepancy that you measured (as a per-
centage).
For paper that tends to stretch, increase the feed
amount by choosing a higher adjustment value. For
paper that tends to shrink, decrease the feed amount by
choosing a lower adjustment value.
B:Standard/Draft
Main-
te-
nance
Head Cleaning
Clean the Printhead. (See "Cleaning the Printhead.")
Choose Head Cleaning A if printing is faint, oddly
colored, or contains foreign substances.
Choose Head Cleaning B if no ink is printed at all, or
if printing is not improved by Head Cleaning A.
Nozzle Check
Print a test pattern to check the nozzles.
Replace P.head
When replacing the Printhead, choose Yes and follow
the instructions on the screen. (See "Replacing the
Printhead.")
Not displayed during a warning message that the re-
maining Maintenance Cartridge capacity is low.
Repl. maint cart
When replacing the Maintenance Cartridge, choose
Yes and follow the instructions on the screen. (See
"Replacing the Maintenance Cartridge.")
Head Info
Indicates information about the printhead.
GL2 Replot
Print the previous GL2 print job again.
GL2 BufferClear
Clear the print data in the replot buffer.
GL2
Set-
tings
Quality
Man-
ager
Color
Mode
Monochrome
Print in monochrome.
Color (CAD) 1
Print in standard colors.
Color (CAD) 2
Print in brighter colors.
Color (CAD) 3
Print emulating the following printers, in colors re-
sembling colors produced by these printers: Canon BJ-
W3000/W3050.(*2
)
Color (CAD) 4
Print emulating the HP Designjet 500/800, in colors
resembling colors produced by these printers.
(*2
)
Color (CAD) 5
Print emulating the HP Designjet 1000, in colors re-
sembling colors produced by this printer.
(*2
)
Print Quality
Choose the print quality.
Input Resolution
Choose the printer input resolution, 600dpi or 300dpi.
Control Panel
>
Printer Menu
>
Menu Settings
iPF750
8
678