Canon imagePROGRAF iPF750 MFP M40 - Manual (Page 693)

Setting Item Description, Instructions
Test
Print Paper Details Print the paper settings as specified in Paper Details.
Print Job Log Print a record of print jobs, including the paper type
and size, amount of ink consumed, and so on. Ink con-
sumption indicates a rough estimate of how much ink
was consumed per page.(*1
→P.684 )
Menu Map Print the menu structure.
Color Palette Print the GL2 color palette.
Adjust
Printer Head
Posi.
Adj. Auto(Standard) The printer prints and reads a test pattern for the auto-
matic adjustment of Printhead alignment relative to
the printing direction. (See "Automatic Adjustment
to Straighten Lines and Colors (Head Posi. Adj.).")
→P.619
Auto(Advanced) The printer prints and reads a test pattern for the auto-
matic adjustment of Printhead alignment relative to
the printing direction and spacing between nozzles and
colors. (See "Automatic Adjustment to Straighten
Lines and Colors (Head Posi. Adj.).")
→P.619
Manual Print a test pattern for adjustment of Printhead align-
ment relative to the printing direction. Enter the ad-
justment value manually based on the resulting pat-
tern. (See "Manual Adjustment to Straighten Lines
and Colors (Head Posi. Adj.).")
→P.621
Head Inc. Adj. Print a test pattern for adjustment of the Printhead ori-
entation. (See "Adjusting Line Misalignment (Head
Inc. Adj.).")
→P.623
Feed
Priori-
ty Adj.
Priori-
ty Automatic Specify exact paper feeding, if desired. Normally, se-
lect Automatic. Choose Print Quality for attractive
printing. Choosing Print Quality also makes banding
less noticeable. Choose Print Length if you prefer to
feed the paper an exact amount. However, note that
slight banding may occur in the direction of carriage
scanning when Print Length is selected.
Print Quality
Print Length
Adj.
Quality Auto(GenuinePpr) Specify this mode with paper identified in the Paper
Reference Guide.
The printer prints and reads a test pattern for automat-
ic adjustment of the feed amount. (See "Automatic
Banding Adjustment (Adj. Quality).")
→P.630
Auto(OtherPaper) Specify this mode with paper not in the Paper Refer-
ence Guide.
The printer prints and reads a test pattern for automat-
ic adjustment of the feed amount. Note that this func-
tion takes more time and consumes more ink than Au-
to(GenuinePpr). (See "Automatic Banding Adjust-
ment (Adj. Quality).")
→P.630
Manual Use this mode with highly transparent media or other
paper for which Auto(GenuinePpr) or Auto(Other-
Paper) cannot be used.
Print a test pattern for adjustment of the feed amount
based on the type of paper. (See "Manual Banding
Adjustment (Adj. Quality).")
→P.631
Control Panel > Printer Menu >
iPF750 Menu Settings
8
677