Canon imagePROGRAF iPF750 MFP M40 - Manual (Page 387)

10.
The Add Plotter - Plotter Name screen opens. Click the Nextbutton.
Note
• You can change the Plotter Name setting here, but you will normally leave it as it is and go to Step
11.
11.
The Add Plotter - Finish screen opens. Click the Finish button.
This completes the installation of the HDI driver.
12.
Remove the User Software CD-ROM from the CD-ROM drive.
Opening the Plotter Configuration Dialog Box
You can open the Plotter Configuration Editor dialog box by two ways.
• Opening from the AutoCAD File Menu →P.372
• Opening from the Start Menu →P.373
Windows Software > HDI Driver >
iPF750 Opening the Plotter Configuration Dialog Box
3
371