Paper not aligned with right guide, Cannot detect papr, Paper cutting failed – Canon imagePROGRAF iPF750 MFP M40 User Manual
Page 835
Paper not aligned with right guide.
Cause
Corrective Action
When paper was loaded, it was not aligned with the guide
on the right side.
Follow these step to reload a sheet.
1.
Push the Release Lever back.
2.
Pull out the sheet.
3.
Pull the Release Lever forward.
4.
Reload the sheet, aligning it with the guide on the right.
Cannot detect papr
Cause
Corrective Action
The paper has come out of the printer.
Follow these step to reload a sheet.
1.
Remove the paper and press the OK button.
2.
Reload the sheet, aligning it with the guide on the right.
(See "Loading Sheets in the Printer.")
Follow these step to reload a sheet.
1.
Push the Release Lever back and remove the paper.
2.
Pull the Release Lever forward.
3.
Reload the sheet, aligning it with the guide on the right.
(See "Loading Sheets in the Printer.")
Paper cutting failed.
Cause
Corrective Action
There are sheets left on the
Ejection Guide.
1.
Push the Release Lever back and remove the paper.
2.
Load the paper.
3.
Pull the Release Lever forward.
4.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Dis-
play Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.")
There is a foreign object by
the Output Tray, obstruct-
ing the Cutter Unit.
1.
Lift the Top Cover and remove the foreign object.
2.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Dis-
play Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
You are not using the print-
er under the recommended
environmental conditions
for the paper.
Use the printer only where the recommended environmental conditions for the paper are
met. Note that various environmental conditions are recommended for various types of
paper. For details on the recommended environmental conditions for paper, see Paper
Reference Guide."
(See Paper Reference Guide.)
You are using paper that is
not compatible with auto-
matic cutting.
1.
Specify Manual as the cutting method and use scissors or a cutting tool to cut the
roll.
(See "Specifying the Cutting Method for Rolls.")
Error Message
>
Messages regarding paper
>
iPF750
Paper not aligned with right guide.
12
819