Canon imagePROGRAF iPF750 MFP M40 - Manual (Page 721)

3.
If a password has been set on the printer, enter the password.
4.
Click Network in the Device Manager menu at left to display the Network page.
5.
Click Edit in the upper-right corner of the TCP/IPv4 group to display the Edit TCP/IP Protocol Settings page.
6.
Refer to the TCP/IP Settings Items table to complete the settings.
TCP/IP Settings Items
Item Details Default Setting
Use DHCP Activate this setting to use DHCP for configuring the IP address. Off
Use BOOTP Activate this setting to use BOOTP for configuring the IP address. Off
Use RARP Activate this setting to use RARP for configuring the IP address. Off
Enable DNS Dy-
namic Update Activate this setting to perform DNS server registration automati-
cally. Off
Use Zeroconf Func-
tion Activate this setting to use Bonjour. On
IP Address Specify the printer's IP address. 0.0.0.0
Subnet Mask Specify the printer's subnet mask. 0.0.0.0
Gateway Address Specify the printer's default gateway. 0.0.0.0
LPD Printing Activate this setting to use LDP Printing. On
IPP Printing Activate this setting to use IPP Printing. On
IPP Printer URI Specify the URI of the printer used for IPP printing using up to
252 characters. printer
RAW Printing Activate this setting to use Raw Printing. On
RAW Mode Bi-di-
rection Activate this setting to use Raw mode bidirectional communica-
tion. Off
FTP Printing Activate this setting to use FTP Printing. On
Use Discovery Activate this setting to use SLP Discovery function. On
Scope Enter the SLP search range. default
SMTP Server Ad-
dress Specify the SMTP server's IP address.
You can also specify the SMTP server domain name, if desired. 0.0.0.0
Primary DNS Serv-
er Address Specify the IP address of the primary DNS server. 0.0.0.0
Secondary DNS
Server Address Specify the IP address of the secondary DNS server. 0.0.0.0
DNS Host Name Specify the printer host name, up to 63 characters (1–63 charac-
ters). Use single-byte letters, numbers, and - (hyphens). Do not use
numbers or - for the first character or - for the last character. NB-18GBipxxxxxx
DNS Domain Name Specify the printer domain name, up to 63 characters. Use single-
byte letters, numbers, - (hyphens), and . (periods). Do not use
numbers, -, or . for the first character, or - or . for the last charac-
ter. blank
Network Setting > Initial Settings >
iPF750 Configuring the Printer's TCP/IP Network Settings With RemoteUI
9
705