Canon imagePROGRAF iPF750 MFP M40 - Manual (Page 595)

Loading Rolls in the Printer
Follow these steps to load rolls in the printer.
Note
• Before loading rolls, make sure the printer is clean inside the Top Cover and around the Ejection Guide. If
these areas are dirty, we recommend cleaning them in advance. (See "Cleaning Inside the Top Cover.")
→P.756
1.
Press the Load button.
2.
Press ▲ or ▼ to select Load Roll Paper, and then press the OK button.
Note
• If any paper has been advanced that will not be used, a message is shown requesting you to remove
it.
Press ▲ or ▼ to select "Yes", and then press the OK button. Remove the paper and go to the next
step.
3.
Positioning your hands as shown, open the Roll Cover.
Handling Paper > Handling rolls >
iPF750 Loading Rolls in the Printer
5
579