Canon imagePROGRAF iPF605 - Manual (Page 75)

Control Panel
Interface Setup
Setting Item Description, Instructions
EOP Timer Specify the timeout period before cancellation of
print jobs that cannot be received by the printer.
IP Mode Choose whether the printer IP address is congured
automatically or a static IP address is entered
manually.
DHCP
BOOTP
Protocol
RARP
Specify the protocol used to congure the IP
address automatically.
IP Address
Subnet Mask
TCP/IP
IP Setting
Default G/W
Specify the printer network information when using
a static IP address.
Enter the IP address assigned to the printer, as well
as the network subnet mask and default gateway.
NetWare Specify the NetWare protocol. To apply your
changes, choose Register Setting.
Frame Type Specify the frame type to use.
NetWare
Print Service Choose the print service.
AppleTalk Specify whether to use the AppleTalk protocol. To
apply your changes, choose Register Setting.
Auto Detect Specify the communication method. To apply your
changes, choose Register Setting.
Choose On for automatic conguration of the
LAN communication protocol. Choose Off to use
settings values of Comm.Mode and Ethernet
Type.
Comm.Mode Choose the LAN communication method.
Ethernet Type Choose the LAN transfer rate.
Spanning Tree Choose whether spanning-tree packets are
supported over the LAN.
Ethernet Driver
MAC Address Displays the MAC address.
Ext. Interface Choose the expansion interface.
Return Defaults Return Defaults/Execute? is displayed if you
press the ▼ button. Choose OK to restore the
network settings to the default values.
Printer Parts 61