Canon imagePROGRAF iPF605 - Manual (Page 134)

Handling rolls
Clearing Jammed Roll Paper
If paper from a roll becomes jammed, Paper jam. is shown on the Display Screen of the Control Panel.
Remove the jammed paper as follows.
Note
• For instructions on removing a paper jam from a roll if the scrap of paper remains in the Paper Feed
Slot, see “Clearing Jammed Paper (Paper Feed Slot)”. (→P.123)
1.
Open the Roll Feed Unit Cover. Use a store-bought cutter or the like to cut the paper of the
loaded roll.
Caution
• When cutting paper, be careful to avoid injury and damaging the printer.
2.
Press Load/Eject button.
3. Remove the jammed paper.
• If paper is jammed inside the Top Cover
1. Open the Top Cover and move the Carriage to the side.
120 Handling Paper