Canon imagePROGRAF iPF605 - Manual (Page 130)

Handling rolls
3.
Close the Roll Feed Unit Cover.
Note
• How the printer operates after the paper is fed varies depending on the setting for automatic
detection of the remaining roll paper, as well as the barcode printed on rolls.
Automatic
Detection of the
Remaining Roll
Paper
Barcodes Printer Operation After the Paper is Fed
Printed The type and amount of paper left is automatically
detected based on the barcode printed on the roll.
There is no need to specify the type and length of the
paper. On
Not printed You must specify the type and length of the paper.
A menu for selection of the paper type and length is
automatically shown on the Display Screen.
(→P.110)
(→P.111)
Printed Off
Not printed
You must specify the type of paper.
(→P.110)
• Cut the edge of the roll if it is soiled or if there are cuts from scissors or the blade after removing
creased edges. (→P.128)
116 Handling Paper