Canon REALiS SX60 User Manual
User’s manual, Multimedia projector
This manual is related to the following products:
Table of contents
Document Outline
- To Start Menu
- Quick Reference - How to start projection
- Table of Contents
- Safety Instructions
- Features of the Multimedia Projector SX7 MarkII/SX60
- Supplied Manuals and Symbols Used in This Manual
- Before Use
- Setting Up the Projector
- Projecting an Image from the Computer
- Connecting the Projector to the Computer
- Starting Projection
- Adjusting the Image
- Preparing the Computer
- Performing the Auto Setup
- Adjusting the Focus
- Adjusting Keystone Distortion
- Setting Up the Computer Screen Automatically (AUTO PC)
- Selecting an Image Mode (IMAGE)
- Selecting a Screen Mode (Aspect)
- Selecting Aspect Ratio of the Projecting Image (Screen aspect)
- Turning Off the Projector
- Projecting an Image from AV Equipment
- Useful Functions Available During a Presentation
- Setting Up Functions from Menus
- Setting Display Status
- Selecting a Screen Mode (1)
- Selecting a Screen Mode (2)
- Selecting a Screen Mode (3)
- Selecting an Input Signal Type (1)
- Selecting an Input Signal Type (2)
- Selecting an Input Signal Type (3)
- Adjusting the Total Number of Dots
- Adjusting the Tracking
- Adjusting the Horizontal Position
- Adjusting the Vertical Position
- Adjusting the Number of Horizontal Pixels
- Adjusting the Number of Vertical Pixels
- Performing Progressive Processing
- Selecting a Menu Position
- Performing the Ceiling-mounted/Rear Projection
- Correcting the Screen Color
- Capturing a Logo to Be Projected (SX60)
- Selecting a Logo Display Position (SX60)
- Displaying a Logo (No signal screen)
- Displaying a Logo (NO SHOW)
- Selecting a Logo at Startup
- Selecting Aspect Ratio of the Screen
- Setting the Image Quality
- Selecting an Image Mode
- Adjusting the Brightness
- Adjusting the Contrast
- Adjusting the Sharpness
- Making a Gamma Correction
- Making Color Adjustment (1) (SX7 II)
- Making Color Adjustment (2)
- Making Color Adjustment (3)
- Making Advanced Color Adjustment (1)
- Making Advanced Color Adjustment (2)
- Making Advanced Color Adjustment (3)
- Correcting the Image According to the Ambient Light (SX7 II)
- Reducing the Lamp Brightness
- Resetting the Image Settings
- Setting Various Function
- Setting Auto Setup Function
- Selecting the Power Management Mode
- Skip the POWER Button Operation
- Enabling/Disabling the Beep
- Selecting a Display Language
- Prohibiting the Projector Operation
- Enabling/Disabling the Guide Message
- Turning On/Off the LED Illumination
- Setting up the Remote Control
- Setting up the Digital Video Input Signal
- Setting a Password
- Registering a Password
- Resetting to the Default Setting
- Resetting the Lamp Counter
- Maintenance
- Troubleshooting
- Appendix
- Index
- Menu Configuration