Canon REALiS SX60 - Manual (Page 55)

55
PROJ
ECTIN
G
AN IMAGE
FROM TH
E COMPUT
ER
Selecting an Image Mode (IMAGE)
You can select an image mode depending on the projecting image. You can also adjust the
image quality (sharpness, gamma, color correction, etc.) as you like.
1
Press the [IMAGE] button.
The Image mode window appears. The selection is toggled among following modes
by pressing the button.
[Standard] Select this to project an image with near-original quality and a
high regard for reproduction of white. It is also suited to project
moving pictures such as a TV program or a DVD movie in a
bright room.
[Presentation] Select this to project an image with quality suited for the pre-
sentation. It also suited to project moving pictures with a high
regard for the brightness.
[Movie] *1 Select this to project moving pictures of all kinds. Its bright-
ness is suited to easily enjoy the atmosphere of a movie the-
ater in a dim room.
[Photo] *2 If you select [Photo] for [Image mode], make sure to set
[Ambient light] in the [Image adjustment] as well.
You can correct an image according to the ambient light
based on [sRGB] in [Image mode] and project the image with
higher tone on the screen by setting [Ambient light]. It is suited
to project an ornamental photo, etc. under an ambient light.
[AdobeRGB] Select this if you want to project an image in the display mode
conforming to Adobe RGB color space. You can project an
image with more accurate color reproduction since It has
wider color gamut than sRGB.
[sRGB] Select this if you want to project an image in the display mode
conforming to Windows standard color space. It is suited to
project an image shot by an sRGB-compatible digital camera.
[Home Cinema] Select this to project a movie with quality suited to seriously
enjoy the atmosphere of a movie theater in a dark room.
*1 It is available if the input signal is [DIGITAL VIDEO], [COMPONENT], [VIDEO] or [S-VIDEO].
*2 It is available if the input signal is [ANALOG PC-1], [ANALOG PC-2], or [DIGITAL PC].
(SX7 MarkII)