Canon REALiS SX60 - Manual (Page 100)

100
SE
TTING
UP FU
NCTIO
N
S FROM MEN
U
S
Displaying a Logo (NO SHOW)
[NO SHOW]
You can display a user logo on a screen when
the projected image is blackened out tempo-
rarily by pressing the [NO SHOW] button on the
remote control. (SX60)
For SX7 MarkII, you can display either of a black
or blue screen.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Selecting a Logo at Startup
[Projector on]
You can display a specified logo on a screen
from the moment the projector is turned on to the
moment it is ready for projection.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Display settings
User screen settings
NO SHOW
Displays no logo (black screen).
Displays no logo (blue background).
Displays a logo captured on the
[Logo capture] screen. (SX60)
z You cannot select [User logo] if you
have not captured a logo on the [Logo
capture] screen. (SX60)
DIGITAL PC ANALOG PC
DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO
(SX60)
Black
Blue
User logo
Display settings
User screen settings
Projector on
Displays the Canon logo captured
at the factory.
Projects an image immediately after
turning on the projector.
Displays a logo captured on the
[Logo capture] screen. (SX60)
z You cannot select [User logo] if you
have not captured a logo on the [Logo
capture] screen. (SX60)
DIGITAL PC ANALOG PC
DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO
(SX60)
Canon logo
Skip
User logo