Canon REALiS SX60 - Manual (Page 40)

40
PROJ
ECTIN
G
AN IMAGE
FROM TH
E COMPUT
ER
Starting Projection
Connect the power cord and turn on the projector to start the projection.
1
Connect the power cord.
Fully insert the power cord plug into the socket.
The [POWER] indicator flashes red.
2
Remove the lens cap and press the [POWER] button.
The [POWER] indicator flashes green, and
then lights in green.
z Once the projector is turned off, it cannot be turned on for a while. Wait until the lamp is
cooled down and the [POWER] indicator lights in red.
Caution
Connect the Ground Terminal
Connect the ground terminal on the power plug to ground. Otherwise, the operating
computer may suffer electromagnetic radiation problems and poor reception by TV and
radio.
Unplug the Power Cord When the Projector is Not in Use
The projector constantly consumes approximately 7W power even when it is turned off.
To ensure safety, malfunction prevention, and power saving, remove the power plug
from the AC outlet when the projector is not used for an extended period of time.