Canon Macro Ring Lite MR-14EX II - Manual (Page 57)

55
This section describes wireless multiple flash shooting using manual
flash. You can shoot with a different flash output setting for each firing
group. Set all the parameters on the master unit.
1 Set the flash mode to <
q>.
Press the < E> button and set to
< q>.
2 Set the firing group.
Press the < ,> button to display
< :> (optical transmission wireless)
and <
M
>.
When C.Fn-15 is set to 0 (p.63), check that <
]> and
<
4> <5> <6> are displayed. You can perform
wireless multiple flash shooting with slave C added.
When C.Fn-15 is set to 1 (p.63), press the <
,> button and
select the flash method from the options below. You can perform
wireless multiple flash shooting with slave A, B, and C added.
• <
_> and
• <
%> and <4> <5>
• <
]> and <4> <5> <6>
3 Select a firing group.
When you selected <
4>
<
5> or <4> <5>
<
6> in step 2, press function
button 3 <
F> or <8> and turn
< 9> to select the group you want to
set the flash output for.
q: Wireless Multiple Flash Shooting with
Manual Flash Output
COP
Y