Cop y – Canon Macro Ring Lite MR-14EX II User Manual
Page 44

42
Flash Control from the Camera’s Menu Screen
Some of the following functions as in the tables below cannot be set
from the camera’s flash function settings screen (p.38). In such a case,
set it by operating the MR-14EX II.
When Custom Function C.Fn-15-0 is set
E-TTL autoflash
Manual flash
When Custom Function C.Fn-15-1 is set
All the functions such as wireless multiple flash shooting can be set
from the flash function settings screen.
Functions Which Cannot Be Set from the Flash Function
Settings Screen
Functions Which Cannot Be Set From Camera
Operation on MR-14EX II
A:B flash ratio (control)
Page 25
Wireless multiple flash shooting
• Transmission channel
• A:B flash ratio (control)
• Flash exposure compensation amount for
slave C
Functions Which Cannot Be Set From Camera
Operation on MR-14EX II
Flash output for flash tube B when tubes
A and B are fired
Page 33
Wireless multiple flash shooting
• Transmission channel
• Flash output for tube B
• Flash output for slave C
Single-side firing (p.26) is not possible when C.Fn-15-1 is set, since C.Fn-
15-1 is a setting for wireless multiple flash shooting.
For Custom Function C.Fn-15 (Macro: Wireless control), see page 63.
COP
Y