Canon Macro Ring Lite MR-14EX II - Manual (Page 49)

47
To perform wireless multiple flash shooting with E-TTL II/E-TTL
autoflash, set the master unit and slave unit with the following
procedure.
Display <
:> and <M>.
Press the < ,> button to display
< :> (optical transmission wireless)
and <
M
>.
When C.Fn-15 is set to 0 (p.63), check that <
^>,
<
l>, and <6> are displayed (p.49).
When C.Fn-15 is set to 1 (p.63), press the <
,> button and
select the flash method from the options below (p.53).
• <
_> and
• <
%> and
• <
^> and <6>
Set firing groups (A, B, and C) for the slave flash units, referring to the
instruction manual of the EX-series Speedlite equipped with the slave
function.
Wireless Settings
Master Unit Setting
Slave Unit Setting
To perform normal flash shooting, press the < ,> button to clear the
settings for the master unit.
COP
Y