Canon Macro Ring Lite MR-14EX II - Manual (Page 41)

39
Flash Control from the Camera’s Menu Screen
The main settable functions from the Camera’s [Flash function
settings] or [External flash func. setting] screen are as follows. The
settings available vary by the camera used, flash mode, etc. For details,
see the next page.
Note that you cannot set “Flash ratio control” or “Wireless multiple flash
shooting” with C.Fn-15-0 setting. Set them by operating the MR-14EX II.
For details on restrictions (functions that cannot be set), see page 42.
However, you can set other functions from the screen.
Settings Available in the Flash Function Settings Screen
Flash firing Enable / Disable
E-TTL II flash metering Evaluative / Average
Flash synchronization speed in Av mode
Flash mode E-TTL II (autoflash) / Manual flash
Shutter synchronization 1st curtain / 2nd curtain / Hi-speed
Flash exposure compensation
FEB
Clear (flash) settings
When the flash exposure compensation is set on the flash unit, flash
exposure compensation cannot be performed from the camera. If both are
set at the same time, priority is given to the setting on the flash unit.
[Flash firing] and [E-TTL II meter.] are displayed in step 2 or step 3 on
the preceding page (vary by the camera).
When [Flash sync. speed in Av mode] is not displayed, it can be set
with the camera’s Custom Function.
COP
Y