Canon Macro Ring Lite MR-14EX II - Manual (Page 27)

25
You can adjust the flash ratio between flash tubes A and B, or fire only
one of them. This can create shadows on the subject to give a more
sculptural look. The flash ratio can be set in half-stop increments as
follows: 8:1 to 1:1 to 1:8 (13 settings).
1 Set to <
l>.
Press the < ,> button to display
<
%> and .
2 Press the <
F> button.
Press function button 3 < F>.
X
The flash ratio is highlighted.
3 Set the flash ratio.
Turn < 9> to set the A:B flash ratio,
then press < 8>.
l Setting the Flash RatioN
Flash with the A:B Flash Ratio Set
A:B = 4:1 Flash tube B only
COP
Y