Canon LV-7292S - Manual (Page 48)

48
Setting
This function decides whether to display
On-Screen Displays.
On ........................ Show all the On-Screen
displays. Use this function
when you want to project
images after the lamp
becomes bright enough.
The factory default setting
is in this option.
Countdown Off ... Show the input image
instead of the countdown
when turning on the
projector. Use this function
when you want to project
the image as early as
possible even when the
lamp is not bright enough.
Off ........................ Hide the On-Screen
Displays except;
● On-Screen Menu.
● Power off? (p. 23)
● P-Timer display. (p. 28)
● No signal for Power
management (p. 51)
● Please wait ...
● Arrows for the True
function in the Aspect
Menu. (p. 37)
Background
Select the background screen for when no
input signal is detected. Press the Point ▲▼
buttons to switch between each option.
blue........Project a blue background.
User........ Project an image captured in the
Logo setting.
Black......Project a black background.
Display
Logo (Logo and Logo PIN code lock settings)
Logo select
This function allows you to customize the
screen logo with Logo select, Capture, Logo
PIN code lock and Logo PIN code change
functions.
 Note:
When On is selected in the Logo PIN code lock
function, Logo select and Capture functions
cannot be selected.
Logo select
This function decides on the starting-up
display from among following options.
User ....... Show the image you captured.
Default ... Show the factory-set logo.
Off .......... Show the countdown display only.