Canon LV-7292S - Manual (Page 40)

40
VIDEO Input
VIDEO System Selection
1
AV System Menu (VIDEO or S-VIDEO)
AV System Menu (COMPONENT)
2
If the projector cannot reproduce proper video
image, select a specific broadcast signal format
from among PAL, SECAM, NTSC, NTSC 4.43,
PAL-M and PAL-N.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
The projector automatically detects an
incoming video signal, and adjusts itself to
optimize its performance.
If the projector cannot reproduce proper video
image, select a specific component video signal
format from among 480i, 575i, 480p, 575p,
720p, 1035i and 1080i.
Auto
COMPONENT VIDEO SIGNAL FORMAT
VIDEO or S-VIDEO
COMPONENT
The projector automatically detects an
incoming video system, and adjusts itself
to optimize its performance. When VIDEO
System is PAL-M or PAL-N, select the system
manually.
Auto
 Note:
The AV System Menu cannot be selected when
selecting SCART.
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select Input and then press the
Point ► or the OK button.
Select
VIDEO, COMPUTER (S-VIDEO)
or COMPUTER (COMPONENT) input
source. (pp. 38-39)
3 Use the Point ▲▼ buttons to select
System and then press the Point ► or
the OK button. Use the Point ▲▼ buttons
to select the desired system and then
press the OK button.