Canon LV-7292S - Manual (Page 43)

VIDEO Input
43
VIDEO Input
An interlaced video signal can be displayed in
progressive mode. Select one of the following
options.
Off ........ Disabled.
L 1 ........ For an active picture.
L 2 ........ For a still picture.
Film ..... For watching a film. With this function,
the projector reproduces pictures
faithful to the original film quality.
Progressive
Noise reduction
Noise interference on the screen can be
reduced. Select one of the following options to
get smoother images.
Off ........ Disabled.
L 1 ........ Lower reduction
L 2 ........ Higher reduction
 Note:
Noise reduction and Progressive can not be
selected when the input signal is 480p, 575p,
720p, 1035i or 1080i (p.40).
To reset the adjusted data, select Reset and
press the OK button. A confirmation box appears
and then select Yes. All adjustments will return
to their previous figures.
Reset
Store
To store the adjusted data, select Store and
press the Point ► or the OK button. Use the
Point ▲▼ buttons to select one from User 1 to
User 4 and press the OK button.
A confirmation box appears and then select
Yes. Stored data can be called up by selecting
an User (1-4) in the Image Mode Selection on
page 41.
Store Menu
A confirmation box
appears and then
select Yes.