Canon LV-7292S - Manual (Page 28)

28
Basic Operation
BLANK button
Press the P-TIMER button on the remote
control unit to operate the Count up/Count
down function. Refer to p.52 for detail of
Setting for the P-timer function.
To stop the count time, press the P-TIMER
button.
To restart the P-timer, press the P-TIMER
button again.
To cancel the P-timer function, press and hold
the P-TIMER button.
P-TIMER button
Press the IMAGE button on the remote control
unit to select a desired image mode of the
screen. See pages 34, 41 for details.
IMAGE button
Blank disappears after 4 seconds.
 Note:
See the previous page for the description of other
buttons.
Select the screen size (See pages 36-37,
44-45 for details).
ASPECT button
black out→ the captured image → normal
→• • • • •
Press the BLANK button on the remote
control unit to black out the image. To restore
to normal, press the BLANK button again or
press any button. When the projected image
is captured and is set as User in the Logo
selection (p. 48), the screen changes each time
you press the BLANK button as follows.
LV-RC07
IMAGE button
BLANK button
P-TIMER button
ASPECT button
Remote control unit
BLANK
P-Timer