Retrieving a stitch design that has been saved -13 – Brother ULT2001 2001N 2001C 2002D 2003D User Manual
Page 290
My Custom Stitch
7-13
Retrieving a Stitch Design That Has Been Saved
Preparation
If the embroidery unit is attached, remove it.
1
Release button
* Turn off the power supply before removing the em-
broidery unit.
1. Press
.
2. To retrieve a stitch pattern saved in the machine’s
memory, press
.
To retrieve a stitch pattern saved on a floppy disk, in-
sert the floppy disk, and then press
.
CAUTION
• Only insert or remove floppy disks while
or
is displayed, or when
prompted to change disks by a message on the
screen.
• Do not insert anything other than floppy disks
into the floppy disk drive slot, otherwise the
floppy disk drive may be damaged.
• Do not insert a floppy disk containing pattern
data other than those saved using our data de-
sign equipment or a sewing machine, otherwise
the sewing machine may malfunction. (Only
.pes, .phc and .dst pattern files can be used.)
CAUTION
If the settings on this screen are locked (
), no key
other than
or
can be operated.