Determining the pattern position -26, Changing the pattern position -26, Determining the pattern position – Brother ULT2001 2001N 2001C 2002D 2003D User Manual
Page 201: Caution
5-26
Embroidery
1
➜
DETERMINING THE PATTERN POSITION
Changing the Pattern Position
Use the arrow keys
to move the pattern in the direction shown
by the arrow.
Press
to center the pattern.
CAUTION
Make sure the needle is up when the embroidery frame is
moving. If the needle is down, it could break and result in
injury.
Example :
Moving the pattern to the upper left
Press
.
CAUTION
Moving the position of a pattern may affect which embroi-
dery frames can be used to sew the pattern (the pattern
may be moved outside the embroidery area of the frame).
Always check the display to make sure which frames can be
used before sewing the pattern. If you use a frame that is
too small, the needle may strike the frame and break, re-
sulting in injury.
1
Shows how far the pattern has moved from center.
- XL 2600i (82 pages)
- PE-770 (88 pages)
- PE-770 (40 pages)
- PE-770 (2 pages)
- SE-400 (16 pages)
- LS-2125i (2 pages)
- LS-2125i (67 pages)
- CS-6000i (68 pages)
- CS-6000i (2 pages)
- CE-5000PRW (68 pages)
- LX-3125 (96 pages)
- SE-400 (24 pages)
- 3034D (76 pages)
- 3034D (2 pages)
- HE 120 (183 pages)
- Innov-IS 500D (12 pages)
- CS-8060 (116 pages)
- CS 80 (115 pages)
- NX-400 (153 pages)
- PC-420 (153 pages)
- NX-200 (111 pages)
- PC-210 210PRW (2 pages)
- PC-210 210PRW (111 pages)
- Innov-IS 4000D (8 pages)
- Boutique 27 37 (111 pages)
- 2340CV (21 pages)
- 2340CV (40 pages)
- DS-120 (100 pages)
- PE-700II 750DUSB (40 pages)
- Innov-is 2200 (48 pages)
- NX-2000 (40 pages)
- NX-2000 (88 pages)
- NX-2000 (2 pages)
- 885-X08 (104 pages)
- PR-600 600C (20 pages)
- INNOVIS 500 (8 pages)
- PS-21 (46 pages)
- PC 6500 (140 pages)
- PE-750D (40 pages)
- XL-6061 (101 pages)
- XL-5051 (45 pages)
- BAS-326F-0 (81 pages)
- CS 100T (67 pages)
- EX 660 (67 pages)
- XL-5010 5020 5030 (82 pages)