Brother MFC 7840W - Manual (Page 96)

Control panel setup
87
6
Restoring the network settings to factory default
6
If you wish to reset the print server back to its default factory settings (resetting all information such as the
password and IP address information), please follow these steps:
Note
This function restores all wired and wireless network settings to the factory default.
a
Press Menu.
b
Press a or b to choose LAN.
Press OK.
c Press a or b to choose Factory Reset.
Press OK.
d Press 1 to choose Reset.
e Press 1 to choose Yes for reboot.
f
The machine will re-start. You can now reconnect the network cable and configure the network settings
to work with your network.
Printing the Network Configuration List
6
Note
Node name: Node name appears in the Network Configuration List. The default node name is
“BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network.
The Network Configuration List prints a report listing all the current network configuration including the
network print server settings.
a Press Reports.
b
Press a or b to choose Network Config.
Press OK.