Brother MFC 7840W - Manual (Page 63)

Wireless configuration for Windows ® using the Brother installer application
54
4
p Click Next. The settings will be sent to your machine. The settings will remain unchanged if you click
Cancel.
Note
If you want to manually enter the IP address settings of your machine, click Change IP Address and enter
the necessary IP address settings for your network.
q To communicate with the configured wireless device, you must configure your computer to use the same
wireless settings. Manually change the wireless settings on your computer to match the machine’s
wireless settings shown on this screen. Check the box after you confirm these settings, and then click
Next.
(The settings shown on this screen are for example only. Your settings will not be the same.)