Brother MFC 7840W - Manual (Page 72)

Wireless configuration for Macintosh ® using the Brother installer application
63
5
Configuration using the SES/WPS/AOSS control panel menu
(Automatic Wireless mode)
5
IMPORTANT
• If you are going to connect your Brother machine to your network, we recommend that you contact your
system administrator prior to installation.
• If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again. Press Menu, 5, 0 for Factory Reset,
Reset and choose Yes to accept the change. The machine will restart automatically.
a Plug the machine’s power cord into the AC power outlet. Turn on the machine’s power switch.
b Press Menu, 5, 2, 7. Using a or b, choose On and press OK.
WLAN Enable
On
c Turn on your Macintosh
®
.
d
Put the supplied CD-ROM into your CD-ROM drive. Double-click the MFL-Pro Suite icon on your
desktop.
e
Double-click the Utilities icon.