Brother MFC 7840W User Manual

Page 60

Text mode
Original mode

Wireless configuration for Windows

using the Brother installer application

• For Windows

XP SP2 users:

You can temporarily change the wireless settings on your computer, following the steps below:

Click Start and then Control Panel.

Click the Network and Internet Connections icon.

Click the Network Connections icon.

Select and right click Wireless Network Connection. Click View Available Wireless Networks.

You can see the SSID of the wireless printer in the list. Select SETUP and click Connect.

Check the Wireless Network Connection status. It may take a few minutes to change from 0.0.0.0
to 169.254.x.x IP address to be shown on screen (where x.x. are numbers between 1 and 254).

Choose the machine you wish to configure, and click Next. If the list is blank, check if the machine is
powered on, and then click Refresh.

Note

The default Node name is “BRWxxxxxxxxxxxx”.