Brother MFC 7840W - Manual (Page 37)

Configuring your machine for a wireless network
28
3
Configuration using the Brother installer application on the CD-ROM to
configure your wireless network machine
3
You can also use the Brother installer application on the CD-ROM we have provided with the printer. You will
be guided by the on-screen instructions until you are able to use your Brother wireless network machine. You
must know your wireless network settings before you proceed with this installation. See Using the Brother
installer application on the CD-ROM to configure your machine for a wireless network on page 35.
Configuration temporarily using a network cable
3
If there is an Ethernet Hub or Router in the same network as the wireless access point (A) of your machine,
you can temporarily connect the Hub or Router to the printer using an Ethernet cable (B), this is an easy way
to configure your machine. You can then remotely configure the machine from a computer on the network.
B
A